HVD90U9640K Chip-Type High-Voltage Divider Resistor-Tai Wang Jia (Huizhou) Electronics co.,Ltd.

HVD82

厚膜无感高压分压电阻
Thick Film Non-inductive High-voltage Divider Resistor

产品特点Product Features

1.HVD82系列是一个三引出端的片式分压网络，其分压比为(R1+R2)/R2。

The HVD82 series is a three-terminal chip partial voltage network with a partial voltage ratio of (R1+R2)/R2.
2. 分压比可按客户要求定做，如1000 :1、100:1 等。

Partial pressure ratio can be customized according to customer requirements, such as 1000:1, 100:1, etc.

3. 片式(厚膜，无感设计)高压分压电阻器，采用96% 含量的陶瓷基片。

Chip type (thick film, non-inductive design) high pressure divider resistor, using 96% ceramic substrate.

适用范围Scope of Application

有高压和脉冲、浪涌的电路中都适用，使用场合相当广泛，如行波管电源、雷达系统、X 射线系统、分析设备和高分辨率CRT 显示器等。

The circuit with high pressure and pulse impulse and surge are suitable for use, so that the field combination should be widely used, such as traveling wave tube power source, radar system, X-ray system, analysis equipment and high resolution CRT display device.

降功率曲线图Derating Curve

结构图Structural Diagram

性能指标Performance Parameters

测试项目 Test item

性能指标 Performance index

[敏感词]精度

Absolute accuracy

对于所有阻值±1.0%

For all resistance values ±1.0%

工作环境温度

Ambient Temperature

-55℃ ~175℃

过载特性

Overload characteristic

1.5 倍的额定电压，5 秒，Δ R≤±0.5%R。

1.5 times rated voltage, 5 seconds, Δ R≤±0.5%R

[敏感词]温度系数

Absolute temperature coefficient

±100PPM/℃（25℃～85℃）其他温度系数要求可协商供货

Other temperature coefficient requirements can be negotiated for supply

相对温度系数

Relative temperature

50PPM/?C(根据要求可达 15PPM/?C)

50PPM/ºC(up to 15PPM/ºC upon request)

功率耐久性

Power durability

额定电压下 1000 小时，Δ R≤±0.4%R。

At 1000 hours of rated voltage, Δ R≤±0.4%R.

耐湿特性

Moisture resistance

MIL-Std-202,方法 106 ， Δ R≤±0.5%R

MIL-Std-202, Method 106, Δ R≤±0.5%R

绝缘电阻

Insulation resistance

>1000M

规格参数Specification Parameter


型号 Model	功率(W) power	[敏感词]工作电压 Maximum working voltage (KV)	尺寸（mm）dimensions
HVD82U	功率(W) power	[敏感词]工作电压 Maximum working voltage (KV)	L±2	S±2	P1±0.5	P2±0.5	I±5	D±0.2
1505	0.2	4	15.8	6.5	7.62	5.08	20	0.55
2508	0.3	5	25.4	7.62	17.78	5.08	20	0.55
2513	0.5	7	25.4	12.7	17.78	5.08	20	0.55
3813P5	1.5	10	38.1	12.7	27.94	5.08	20	0.55
3813P7	1.5	10	38.1	12.7	27.94	7.62	20	0.55
5113	2.5	12	50.8	12.7	38.1	10.16	20	0.75
7615	3.5	15	76.2	15.24	63.5	10.16	20	0.75
10215	4.5	20	101.6	15.24	88.9	10.16	20	0.75
9020	5	18	90	20	76.9	10.16	20	0.75
12220	5.5	25	122	20	111.3	5.6	20	0.75